Simultaneous determination of nanomole amounts of sulphur dioxide and hydrogen sulphide by flow injection analysis with on-line preconcentration by means of capillary denuder tubes.
Journal - Annali di chimica (Italy )
A simple and rapid method for trace determination of SO2 and H2S in gaseous samples by using a flow injection system with on line preconcentration on capillary denuder is described. The gaseous samples are led through a 0.4 M sulphamic acid solution, retaining nitrogen dioxide, ammonia and hydrogen chloride. The sulphur dioxide is collected from the carrier gas stream (250 cm3 min-1) as sulphuric acid in a capillary denuder tube coated with a thin layer of 0.01-0.03 M hydrogen peroxide solution of 0.05 mM sulphuric acid; hydrogen sulphide passes into a second tube coated with 0.075 mM sodium sulphide solution of 0.1 M aqueous sodium hydroxide. The films containing the sulphuric acid and the sodium sulphide, respectively, are eluted with the corresponding circulating absorbent streams and pass through the detectors. Sulphuric acid is detected by conductimetry and sulphide is determined spectrophotometrically at 230 nm. If nanoequivalent amounts of H2S are present in the sample containing a large concentration of SO2 (SO2/H2S concentration ratio > 20), the sulphur dioxide is filtered out of the sample gas stream by solid sodium hydrogen carbonate. A limit of detection of 3.5 micrograms m-3 is obtained.
|ISSN : ||0003-4592|
|Mesh Heading : ||Air Pollutants Electron Probe Microanalysis Environmental Monitoring Humans Hydrogen Sulfide Sulfur Dioxide|
|Mesh Heading Relevant : ||analysis analysis analysis|